TinyZero Charge Current

greg.brougham

  • Full Member
  • ***
    • Posts: 10
    • View Profile
Hi, is anyone able to provide the charge current that TinyZero provides to the battery?

I have not been able to find it in any of the specifications but noted that the Tiny Battery Charger is 100 mA  (500mA with a resistor change)

https://tinycircuits.com/products/tiny-battery-charger
« Last Edit: December 27, 2021, 10:38:46 AM by greg.brougham »


mjculross

  • Full Member
  • ***
    • Posts: 25
    • View Profile
Comparing the schematic (https://github.com/TinyCircuits/TinyCircuits-Tiny_Peripherals-Batt_Charger-ASL2112/raw/master/design_files/ASL2112.pdf) for the Tiny Battery Charger (populated with a 10K resister as the default, where the schematic note indicates that it is configured for 100mA charging current) & the schematic (https://github.com/TinyCircuits/TinyCircuits-TinyZero-ASM2021/raw/master/design_files/TinyZero_Schematic_Rev5.pdf) for the TinyZero processor (which also has a 10K resistor), I would guess that the TinyZero will be providing 100mA of charging current.

Mark J Culross
KD5RXT
« Last Edit: December 24, 2021, 07:34:07 PM by mjculross »


greg.brougham

  • Full Member
  • ***
    • Posts: 10
    • View Profile
Thanks Mark. I suspected it was the same as the tiny battery charger


 

SMF spam blocked by CleanTalk