TinyScreen+ Buttons not working

Started by jae, July 23, 2024, 02:00:27 PM

Previous topic - Next topic
Go Down Pages1
User actions

jae

*
Newbie
Posts: 1
Logged
July 23, 2024, 02:00:27 PM
Hi!

I have been following the FitnessTracker tutorial and managed to successfully upload the program to the TinyScreen+. However, after pressing a button nothing happens. It seems the reason is that the button presses are not recognized - I made it display the value of the getButton() function on the display and it always shows 0 no matter if/which Button I press. Any ideas why this could be the case?

Thanks!

Best,

Jae

thelmawilliam

*
Newbie
Posts: 0
Logged
October 22, 2024, 03:00:28 AM Last Edit: October 27, 2024, 11:09:39 PM by thelmawilliam
#1
QuoteHi!

I have been following the FitnessTracker tutorial and managed to successfully upload the program to the TinyScreen+. However, after pressing a button nothing happens. It seems the reason is that the button presses are not recognized - I made it display the value of the getButton() function on the display and it always shows 0 no matter if/which Button I press. geometry dash liteAny ideas why this could be the case?

Thanks!

Best,

Jae
it could be the way the hardware is seated in the case. I think you should remove the hardware from the case gently, then try the buttons while the hardware is outside of the case to see if that works.
Go Up Pages1
User actions
SMF spam blocked by CleanTalk