USB for power and bluetooth

[nikhil]

Hi,

It appears as if the bluetooth shield cannot work with the coin cells on the board. The most convenient other way to get power while developing, is to plug in a USB cable into a computer via the USB shield. So here is the question - can I plug the bluetooth shield and USB shield onto the Arduino and use the bluetooth shield for communication and the USB shield purely to draw power?

Nikhil

[calvinthedestroyer]

Yeah, the Bluetooth shield takes a lot of power. There are connections where you can hook up a bigger battery to the TinyDuino

[TinyCircuits]

Hi Nikhil,

Unfortunately the standard BT shield uses the same hardware UART pins as the USB TinyShield, so they are not able to be used at the same time.

Ken
TinyCircuits