Thumby Power Problems

Started by dwayneclark, April 23, 2025, 03:55:27 AM

Previous topic - Next topic

dwayneclark

*
Newbie
Posts: 1
Logged
Hello,
I recently got a Thumby, and it was great until I accidentally washed it in my pocket. Everything seems to work fine except for the power switch. When I try to turn it off, it just displays the TinyCircuits logo and boots to the start screen. I've tried letting the battery run out, but whenever I charge it, it either boots back up or shows static on the screen. Do you have any suggestions?

Youndected1

*
Newbie
Posts: 1
Logged
Quote from: dwayneclark on April 23, 2025, 03:55:27 AMHello,
I recently got a Thumby, and it was great until I accidentally washed it in my pocket. Everything seems to work fine except for the power switch. When I try to turn it off, it just displays the TinyCircuits logo and boots to the start screen. I've tried letting the battery run out, but whenever I charge it, it either boots back up or shows static on the screen. Do you have any suggestions gunspin?
That sounds frustrating! Since the Thumby still powers on but the switch isn't working properly after water exposure, it's likely there's residual moisture or corrosion affecting the power switch circuit. I'd recommend leaving it powered off (if possible) and placing it in a sealed container with silica gel packets or uncooked rice for at least 48 hours to help draw out any remaining moisture. If the issue persists, the switch or board may have shorted, in which case reaching out to TinyCircuits support for a hardware check or possible repair would be a good next step.

celemtine

*
Newbie
Posts: 2
  1. celemtine
Logged
Quote from: dwayneclark on April 23, 2025, 03:55:27 AMHello,
I recently got a Thumby, and it was great until I accidentally washed it in my pocket. Everything seems to work fine except for the power switch. When I try to turn it off, it just displays the TinyCircuits logo and boots to the start screen. I've tried letting the battery run out, but whenever I charge it, it either boots back up or shows static on the screen. Do you have any suggestions?
I'm guessing it's possible that the water is affecting the power switch or the contacts that control the shutdown sequence.

Saiyad

*
Newbie
Posts: 1
Logged
The Waffle House Menu Prices 2025 give you a clear idea of what to expect before you dine. Whether you want a quick snack or a big breakfast, the prices are fair and reasonable. It's one of the best spots for tasty, budget-friendly meals. Comfort food done right.

Snowrider3d

*
Newbie
Posts: 1
  1. Snowrider3d
Location: United States
Logged
Oh no, that's a bummer about your Thumby! Water damage can be tricky. Since the rest seems to work, it might just be corrosion on the power switch contacts. Maybe try very carefully cleaning around the switch with a tiny bit of isopropyl alcohol (90% or higher) and a cotton swab. In the meantime, if you need a quick distraction while troubleshooting, have you ever tried Snow Rider 3D on a phone or computer? It's a simple but surprisingly addictive game. Hope you get your Thumby fixed!


salmawis

*
Newbie
Posts: 1
Logged
Oh no, washing your Thumby is a rough break! That's definitely a classic "oops" moment that many tech enthusiasts can relate to, even if it's not a game console.

Claytona

*
Newbie
Posts: 0
  1. Claytona
Logged
It sounds like moisture is still trapped around the power switch, causing weird boot behavior. I'd try a careful rinse with 99% isopropyl alcohol and let it dry in warm, dry air for 24–48 hours, then reflow the switch with gentle heat if possible.

tiffanyidest

***
Full Member
Posts: 12
  1. ICQ - 7362519
  2. tiffanyidest
Location: Россия
Logged
 авто mailsco.online становились современными. Электрические машины делают шаги вперёд на рынке авто.
игры https://mailsco.online/ веселье способствуют формированию рационального понимания, улучшают умения общения.

Deboraharrom

*
Newbie
Posts: 1
  1. ICQ - 268146388
  2. Deboraharrom
Location: Brazil
Logged
Подбираете проверенного партнера редкоземельных металлов и промышленных сплавов? Рекомендуем компанию Редметсплав.рф. Мы презентуем широкий ассортимент продукции, подтверждая строгое соответствие стандартам каждого товара.
 
Редметсплав.рф сопровождает все стадии сделки, формируя полный пакет необходимых документов для законного использования товаров. Неважно, какие объемы вам необходимы — от мелких партий до крупнооптовых заказов, мы готовы реализовать любой запрос с профессиональным сопровождением.
 
Наша команда консультантов всегда на связи, чтобы проконсультировать при выборе товаров и ответить на любые вопросы, связанные с эксплуатацией и свойствами металлов. Выбирая нас, вы выбираете уверенность в каждой минуте сотрудничества.
 
Заходите на страницу Редметсплав.рф и убедитесь, что наши стандарты работы — залог вашего успеха.
Наши товары:
 
<a href=https://редметсплав.рф/catalog/latunnoe-litoe-koltso/latunnoe-litoe-koltso-400kh800-mm-lk/>Латунное литое кольцо 400х800 мм ЛК</a>  Купите латунные литые кольца от производителя. Великолепное сочетание прочности и эстетики. Высокое качество по доступной цене. Широкий выбор форм и диаметров. Идеальны для ювелирных изделий и производства музыкальных инструментов.