I recently ordered several components including the TinyScreen (ASM2022). But whenever I plug it with my computer or even the battery from TinyCircuits, the screen does not seem to turn on. The LED light indicator just flashes once when I plug the screen into my computer and then nothing happens. The LED indicator only stays on when I turn on the screen, attach it to the battery and then connect it to my computer. But the Arduino IDE does not detect it, so my guess is the battery is powering the display, not the computer.  Is the screen damaged?

Update: It appears that the issue was related to the software. The resolution involved the following steps:

1. Slide the power switch on the TinyScreen+ to the OFF position.
2. Press and hold the bootloader button (the button closest to the USB connector).
3. While holding the button, slide the switch to the ON position.

If executed correctly, the TinyScreen+ will show "TinyScreen+ Bootloader Mode" on the screen. Please note that you might need to repeat these steps if it doesn't work on the first attempt.

I appreciate Ken Burns for the help!

Did you solve the problem?

fnaf plus