Building binaries problem

[dulsi]

I haven't built anything for tinyarcade/pocketarcade for a while. I installed the latest arduino IDE (2.1.0). I installed the latest TinyScreen library (1.1.0). I exported the compiled binaries. I copied the .bin to the sd card. It doesn't run. Any idea what could be wrong? Or how to debug the issue?

[lennevia]

I've recently seen a few issues come up with custom boards packages used for programming third-party boards, specifically between our SAMD21 boards like the TinyZero and Tiny Arcade.

I recommend that the Legacy IDE be used, the legacy download is available toward the end of the page: https://www.arduino.cc/en/software

Let me know if that solves the issue!

Cheers,
Réna

[dulsi]

Legacy IDE did work. Thanks. I do hope you fix it to work with the new IDE at some point.

[GeraldCompton]

I haven't built anything for tinyarcade/pocketarcade for a while. I installed the latest arduino IDE (2.1.0). I installed the latest TinyScreen library (1.1.0). I exported the compiled binaries. I copied the .bin to the sd card. It doesn't run. Any idea what could be wrong? Or how to debug the issue?
geometry dash meltdown

There are several things to check when troubleshooting issues with building for TinyArcade/PocketArcade, especially when upgrading to newer versions of the Arduino IDE and libraries. Here's a step-by-step guide to help you pinpoint and resolve the issue:
- Check Compatibility with the Latest TinyScreen Library
- Verify the Arduino Board Settings
- Check the Sketch Code for Compatibility
- Test with a Known Good Example
- Check SD Card and File Structure