• All four servos do not calibrate on Step 6 using the preprogrammed RobotZero processor.


• One servo does not calibrate, so I moved it to another socket and it calibrated.
• I tried two different RobotZero processor boards with the same result of one connector not calibrating the servo.


• All four servos do not calibrate TO THE SAME ANGLE on Step 6 using the preprogrammed RobotZero processor.


• If I move servos from one socket to another socket, they move to different angles.


• Parts AB6, AB7 and AB8 are not shaped like the images on Steps 9 and 10


• Step 17 should say acrylic ROUND part E instead of acrylic HEX part E

Hello Alan,

We made the edits to the pictures and the wording that you suggested. You can review the changes here:

Tiny Arm Assembly

The new assembly instructions are WONDERFUL with the green color coding to show important locations in the assembly step.

Happy to hear you like them! We are looking to include animations in the future in a web page to show how pieces fit together.