I am able to successfully use the TinyScreen or the Wifi, bot not together at the same time. I noticed that after the Wifi is connected to the AP, the TinyScreen get scrambled.

I'm using the Adafruit lib for the CC3000 driver. Also checked the "compatibility matrix" but did not see anything related.

Please advise.

Thx

The hw stack consists of Processor, Programmer, Proto Board (where I'm reading from A0), SD card (not yet initialized/used), Wifi then the TinyScreen.

Can anybody confirm TinyScreen & Wifi do not use the same SPI address or other pins ?

Thx

They use the same SCLK and MOSI pins