TinyDuino WIFI shield issue

Started by hmf, May 29, 2015, 06:17:58 PM

Previous topic - Next topic

hmf

*
Newbie
Posts: 1
Logged
Hi,

I recently got a Tinyduino WiFi shield and I try to use Adafruit 3300 library to build my project. However, I got the following problems.

1. The buildtest of Adafruit does not work for me. I describe the details in the post:
https://forums.adafruit.com/viewtopic.php?f=22&t=74447

2. I tried to build a project like this one:
https://www.openhomeautomation.net/tiny-wifi-temperature-arduino/

I used the exact same code but it does not work. I describe the details in the post:
https://forums.adafruit.com/viewtopic.php?f=22&t=74453

I suspect there is something wrong with the WiFi shield.
Thanks!

Ben Rose

Administrator
*****
Hero Member
Posts: 392
Logged
Made any progress on this? One suggestion I have is seeing if a different firmware version works better- the Adafruit library includes code to change versions. Sometimes different firmware is 'happier' with different access points, servers, etc. Just make sure you change the pin definitions in their examples.

SMF spam blocked by CleanTalk