Messages

361

Wirelings / Re: Wireling Interrupt specifics

« on: May 01, 2020, 11:47:32 AM »

Hello Mike,

What board are you looking at?

Is there something specific you are aiming to accomplish with interrupts?

-Réna

362

General Discussion / Re: Barometric Pressure Sensor / Wrong pressure and altitude output with TinyZero

« on: April 29, 2020, 01:39:26 PM »

Hello Willem,

Got the code fix pushed so it should be fixed across everything now.

Thanks again for finding that!

Réna

363

General Discussion / Re: Barometric Pressure Sensor / Wrong pressure and altitude output with TinyZero

« on: April 27, 2020, 11:49:55 AM »

Hello,

Thanks for the investigation and fix you found!

If you would like, you can submit a pull request for the software change you talked about on the GitHub repository: https://github.com/TinyCircuits/TinyCircuits-TinyShield-Sensor-ASD2511/tree/master/examples/Barometric-Pressure_TinyShield_example

Or, you can attach the code here to be tested.

Thank you for your time!

Réna

364

Wirelings / Wireling Welcome!

« on: April 22, 2020, 02:28:24 PM »

Welcome to the Wireling portion of the TinyCircuits forum! Post questions, topics, ideas for new Wirelings, or Wireling projects.

New to Wirelings? Check out the Wireling Overview to learn more!

365

Tiny Arcade & Pocket Arcade / Re: Tiny arcade stuck in bootloader mode

« on: April 13, 2020, 03:44:53 PM »

Happy it helped!

366

General Discussion / Re: graphicsbuffer.h

« on: March 30, 2020, 02:46:35 PM »

Hmm, I can't say I've run into that issue before!

Probably something to do with it not being in the right place. You can go through the Library Installation page to check and see what might have gone wrong so it doesn't happen again: https://learn.tinycircuits.com/Help/Installing_Libraries_Tutorial/

367

General Discussion / Re: [inprogress] Tiny arm assembly instructions errors and corrections.

« on: March 27, 2020, 12:47:25 PM »

Happy to hear you like them! We are looking to include animations in the future in a web page to show how pieces fit together.

368

General Discussion / Re: [inprogress] Tiny arm assembly instructions errors and corrections.

« on: March 16, 2020, 01:08:06 PM »

Hello Alan,

We made the edits to the pictures and the wording that you suggested. You can review the changes here:

Tiny Arm Assembly

369

General Discussion / Re: [inprogress] What servo angles should be used for calibration for Tiny Arm?

« on: March 16, 2020, 12:06:02 PM »

Hello Alan,

It looks like there was some sort of bug in the servo code. It was fixed up by Ben, and will be corrected on the website. For now, it is corrected in the GitHub repo, and you can download it:

Premium Robot Kit Corrected Code

370

General Discussion / Re: [solved] Where is the code for the premium robot kit?

« on: March 02, 2020, 07:52:13 PM »

Oops, sorry about that!

The ATtiny841 library was the hold-up on the premium kit program and since we are in the process of changing everything over to fit that library, I missed that in testing since I have the library installed here.

That will be fixed immediately across everything!

Thank you for bringing that to our attention

371

General Discussion / Re: Code for kickstarter robot does not compile

« on: February 27, 2020, 12:34:56 PM »

Hmm. It's possible you have an older version of the TinierScreen library too?

I have both libraries and they both have a font.h file and I am able to compile and upload the programs to a RobotZero. The only difference I see between us is my master files are just named GraphicsBuffer and TinierScreen in my library directory. You could try re-downloading the newest version of TinierScreen from the GitHub page: https://github.com/TinyCircuits/TinyCircuits-TinierScreen-Lib

Hope that helps!

372

General Discussion / Re: Where is the code for the premium robot kit?

« on: February 25, 2020, 07:22:09 PM »

It took a while to get into a publishable format - so thank you for your patience!

It is now available from the Learn Page: https://learn.tinycircuits.com/Wirelings/Wireling_Premium_Robot_Kit_Tutorial/

Or you can directly download the zip folder here: https://github.com/TinyCircuits/TinyCircuits-Wireling-Kickstarter-Kits/raw/master/Premium-Robot-Kit/examples/RobotArmExample.zip

Best,

Réna

373

General Discussion / Re: Code for kickstarter robot does not compile

« on: February 25, 2020, 12:43:59 PM »

Hello!

It looks like you need the most updated version of the GraphicsBuffer library: https://github.com/TinyCircuits/TinyCircuits-GraphicsBuffer-Lib

374

General Discussion / Re: Wireling Connectors

« on: February 19, 2020, 01:39:39 PM »

Hello John,

We'll look into it, but we are not aware of anything like that for now!

Thanks,

Réna

375

General Discussion / Re: Windows 7 USB driver RobotZero board

« on: February 18, 2020, 03:09:31 PM »

You should definitely be selecting RobotZero for the RobotZero processor, otherwise, your programs will not work as expected or even at all.

The TinyScreen+, TinyZero, WirelingZero, and RobotZero all share the same processor (the SAMD21) so they all show up as "TinyScreen+" in the Arduino IDE due to the way the board package is written. This is a little confusing, but it means that your computer is correctly recognizing your RobotZero, so that's good!

It's strange that you're getting a failure even though the programs are uploading. I'm using Arduino IDE version 1.8.8 and I don't have that problem, so maybe there are some bugs in the most recent version? It's a hassle to undownload the IDE and redownload a different version since you have to reinstall any boards packages, but that could help if you continue getting these mixed messages.

Before trying that, I would recommend turning your computer off and back on, and using bootloader on the RobotZero to get it out of this behavior.

I hope that helps!