I've "Clone and Edit"ed both games and they both return "Verification Successful!" when clicking the Verify Code button; but, for some reason I get the same response every time when trying to run on the arduino. Even after restarting my computer and unplugging/replugging everything back in, it still wont run. Hmm..

I'm running it on Google Chrome; what browser are you using to compile it?

I use firefox. If the verification is successful, it means that the program was created and that it's merely the upload the fails.

Have you checked the com port settings? I used com1 for my device, maybe it's different for yours?

Ah - it had to do with using Chrome. I switched to Firefox and got them running no problem

Thanks for your help nonetheless, and for writing these awesome games!

I had noticed that someone (maybe on youtube?) had mentioned wanting the left stick to be used to steer and the right stick to be used to shoot. I went ahead and modified your original code to switch these.

The code is posted on: https://codebender.cc/sketch:115627

Hope this is of some use to someone!

Asteroids: https://codebender.cc/sketch:107161#Asteroids%201.ino
Stellar Explorer: https://codebender.cc/sketch:98686#Stellar%20explorer.ino

Asteroids returns: "Could not connect to your device. Make sure that you have connected it properly, that you have selected the correct settings (device type and port) and try again" even though other programs are being uploaded successfully without this problem. Has anyone had this issue?

Stellar Explorer returns: "There was an error compiling." and I can't seem to figure out where it's going wrong.

Thanks for your help in advance!

Both are games I've uploaded. Interesting that they don't work for you  - both compile and upload for me without problems. Do they also report errors when you "verify code"?

I sometimes also have trouble with the serial connection. Most often it simply works by unplugging the device and plugging it in again.

Thanks for the quick response!

I've "Clone and Edit"ed both games and they both return "Verification Successful!" when clicking the Verify Code button; but, for some reason I get the same response every time when trying to run on the arduino. Even after restarting my computer and unplugging/replugging everything back in, it still wont run. Hmm..

I'm running it on Google Chrome; what browser are you using to compile it?

Ah - it had to do with using Chrome. I switched to Firefox and got them running no problem

Thanks for your help nonetheless, and for writing these awesome games!

I had noticed that someone (maybe on youtube?) had mentioned wanting the left stick to be used to steer and the right stick to be used to shoot. I went ahead and modified your original code to switch these.

The code is posted on: https://codebender.cc/sketch:115627

Hope this is of some use to someone!

Asteroids: https://codebender.cc/sketch:107161#Asteroids%201.ino
Stellar Explorer: https://codebender.cc/sketch:98686#Stellar%20explorer.ino

Asteroids returns: "Could not connect to your device. Make sure that you have connected it properly, that you have selected the correct settings (device type and port) and try again" even though other programs are being uploaded successfully without this problem. Has anyone had this issue?

Stellar Explorer returns: "There was an error compiling." and I can't seem to figure out where it's going wrong.

Thanks for your help in advance!

Both are games I've uploaded. Interesting that they don't work for you  - both compile and upload for me without problems. Do they also report errors when you "verify code"?

I sometimes also have trouble with the serial connection. Most often it simply works by unplugging the device and plugging it in again.

Thanks for the quick response!

I've "Clone and Edit"ed both games and they both return "Verification Successful!" when clicking the Verify Code button; but, for some reason I get the same response every time when trying to run on the arduino. Even after restarting my computer and unplugging/replugging everything back in, it still wont run. Hmm..

I'm running it on Google Chrome; what browser are you using to compile it?

Also - a few questions.

I have been unable to get a few programs to run for some unknown reason. I figure most of you are the creators of these games, so maybe you will be able to point me in the right direction I have been able to get most things (flappy bird, mario, ect..) to run fine on the joystick and screen tinyduino package.

The games which I cant get to work are:

Asteroids: https://codebender.cc/sketch:107161#Asteroids%201.ino
Stellar Explorer: https://codebender.cc/sketch:98686#Stellar%20explorer.ino

Asteroids returns: "Could not connect to your device. Make sure that you have connected it properly, that you have selected the correct settings (device type and port) and try again" even though other programs are being uploaded successfully without this problem. Has anyone had this issue?

Stellar Explorer returns: "There was an error compiling." and I can't seem to figure out where it's going wrong.

Thanks for your help in advance!

Hey all!

I recently bought one of the Tinyduino video game kits at the makers faire in the Bay Area, and I've got to say that everyone here and on CodeBender has given me quite a bit to play with! This is awesome!

I noticed that there was a FlappyBird port for the TinyScreen on CodeBender which had a counter for how many tubes you had flown through, but couldn't find a code for FlappyBird that was TinyJoystick compatible which also had a counter.

So - I merged the two codes

Here is what I ended up with: It loads just fine on what I (and I believe most of us) are using.

https://codebender.cc/sketch:115301

I hope it helps for you guys as well!