TinyCircuits Forum

TinyCircuits Products => TinyDuino Processors & TinyShields => Topic started by: joe.xusun on October 20, 2014, 11:16:04 AM

Title: TinyDuino Connectors and pin-out
Post by: joe.xusun on October 20, 2014, 11:16:04 AM

Does anyone know the name of the connector used to stack boards together? I'm trying to make a custom board for my TinyDuino.

Also, does anyone know the pin-outs the connectors? I'm new to eagleCAD, not at the point to be able to trace board drawings ... Thanks!!

Joseph

Title: Re: TinyDuino Connectors and pin-out
Post by: bowden100 on November 15, 2014, 04:00:26 PM

Quote from: joe.xusun on October 20, 2014, 11:16:04 AM

Does anyone know the name of the connector used to stack boards together? I'm trying to make a custom board for my TinyDuino.

Also, does anyone know the pin-outs the connectors? I'm new to eagleCAD, not at the point to be able to trace board drawings ... Thanks!!

Joseph

You can get this information from the schematics of any board..If you go the main tiny-circuits website and clip on for example the processor board and then click on design files and then click on schematic..you can get the info that you need.