TinyCircuits Forum

TinyCircuits Products => TinyDuino Processors & TinyShields => Topic started by: Grimstone on October 19, 2016, 06:51:01 PM

Title: Tinyscreen+, SD Card issue
Post by: Grimstone on October 19, 2016, 06:51:01 PM

I am using a tinyscreen+ with the IMU 9dof and SD card reader stacked together. Tried both the SD card info and the datalogger example (after setting the pin to 10). I am not getting any output at all. The serial baud rate is set to 9600. I send over a string to start, but getting no output back. Is there something additional needed to make the example work with the Tinyscreen+ over the traditional Tinyduino?

Title: Re: Tinyscreen+, SD Card issue
Post by: Grimstone on October 21, 2016, 06:26:05 PM

 :-\

Title: Re: Tinyscreen+, SD Card issue
Post by: Grimstone on October 23, 2016, 05:02:33 PM

Never mind. Found it. Once again have to redefine Serial / SerialUSB.