Text only | Text with Images

TinyCircuits Forum

TinyCircuits Products => TinyTV & Tiny Video Player => Topic started by: aroundthestorm on July 15, 2024, 04:03:26 PM

Title: Port & Board not showing up for Tiny Video Player/Tiny TV on Arduino (mac)
Post by: aroundthestorm on July 15, 2024, 04:03:26 PM
When I go to set up the tiny video player for uploading videos to, Arduino does not show the according port or board that is supposed to be visible (TinyScreen+).

I have tried using different microUSB cords. I have tried restarting the computer.

I have tried installing Arduino on my Windows 7 computer to see if maybe the issue was Mac related but am unable to install it on there to test.

Any advice on how to remedy this elusive element not appearing (in order for video uploads to the player to happen)?

Thanks in advance!

Title: Re: Port & Board not showing up for Tiny Video Player/Tiny TV on Arduino (mac)
Post by: aroundthestorm on July 23, 2024, 12:55:52 PM
Hi I'm still looking for help on this, if anyone can give me some pointers as to what to try. Here are the specs for the Mac in question
Title: Re: Port & Board not showing up for Tiny Video Player/Tiny TV on Arduino (mac)
Post by: aroundthestorm on July 23, 2024, 04:21:48 PM
In case the image isn't showing:

macOS Monterey

Version 12.7.5

MacBook Pro (Retina, 15-inch, Mid 2015)

Processor 2.2 GHz Quad-Core Intel Core i7

Memory 16 GB 1600 MHz DDR3

Graphics Intel Iris Pro 1536 MB
Title: Re: Port & Board not showing up for Tiny Video Player/Tiny TV on Arduino (mac)
Post by: aroundthestorm on August 01, 2024, 10:58:33 AM
Nevermind, I got it!
Text only | Text with Images