Text only | Text with Images

TinyCircuits Forum

TinyCircuits Products => TinyLily => Topic started by: axelgel on September 25, 2015, 01:30:20 PM

Title: analog reading
Post by: axelgel on September 25, 2015, 01:30:20 PM
Hello,
I am testing the analog reader . I objserved that the reader give me 1025 sometimes also with the circuit open. I simply put two wire without closing the circuit between the + and a0.
Could you suggest me a way for fixing it?
Kind Regards.
Title: Re: analog reading
Post by: Ben Rose on September 29, 2015, 03:06:43 PM
Hi,

Can you post your code? You should be seeing a range of 0 to 1023- with an open circuit, it should settle on a value in this range.

Thanks,
Ben
Title: Re: analog reading
Post by: axelgel on October 14, 2015, 09:56:38 AM
Quote from: Ben Rose on September 29, 2015, 03:06:43 PM
Hi,

Can you post your code? You should be seeing a range of 0 to 1023- with an open circuit, it should settle on a value in this range.

Thanks,
Ben

Hello I found the solution. Was simply a wrong wire :-)
thanks...
Text only | Text with Images