TinyCircuits Forum

TinyCircuits Products => TinyDuino Processors & TinyShields => Topic started by: arduinoob on November 28, 2017, 05:35:29 PM

Title: TinyScreen+ not recognised (port is grayed out)
Post by: arduinoob on November 28, 2017, 05:35:29 PM

Hi,
Just received my TinyScreen+, I'm using IDE 1.8.5, I followed exactly the instructions on https://tinycircuits.com/blogs/learn/158833543-tinyscreen-setup

Tried it on my Windows 10 machine - Port menu item is grayed out , looked under 'device manager' and couldn't find the device.

I tried again the full setup on my MAC  - under port - I can see 2 items (Bluetooth and NAXANE), none of them is the board.

I also tried powering off/on and resetting the board - did not help
What's next? my feeling is that the board is dead.


Thank you!

-arduinoob

Title: Re: TinyScreen+ not recognised (port is grayed out)
Post by: arduinoob on November 29, 2017, 03:22:13 PM

OK, problrm solved.
When you waqnt to reset your TinyScreen, you should turn it on while holding down the button closest to the USB connector  :D

A reset solved my issue