Show Posts
1
TinyDuino Processors & TinyShields / Smart watch BLE module setting
« on: April 19, 2017, 10:40:26 AM »
Good time of day!
I've recently bought a TinyDuino smartwatch kit and installed there IOS software version, from TinyDuino web. But I had several problems with it.
(If what I'm a bit beginner so Imight made lot's of stupidity in code, so keep calm about this 
)
Fortunalely some way I was able to get notification and incoming call event, so now It worked almost always fine for me.
Another thing was time receiving. After programming it received real time from phone just with little deviation. But when I used same way second time it loaded time which was received first time.
Probably there has to be way to clean registers or something like that.
Unfortunately I can't check code right now, so if you are able, please check it on your own device.
I've recently bought a TinyDuino smartwatch kit and installed there IOS software version, from TinyDuino web. But I had several problems with it.
(If what I'm a bit beginner so I
)Fortunalely some way I was able to get notification and incoming call event, so now It worked almost always fine for me.
Another thing was time receiving. After programming it received real time from phone just with little deviation. But when I used same way second time it loaded time which was received first time.
Probably there has to be way to clean registers or something like that.
Unfortunately I can't check code right now, so if you are able, please check it on your own device.