1
General Discussion / Re: WIFI
« on: November 26, 2013, 03:31:03 PM »mhudspeth,
I was just looking at the Adafruit library too. I'm completely new to Arduino, so bear with me, but taking the InternetTime.ino code as an example the following would be true?Code: [Select]. . .
That's what I had, yes. Make sure you have the network SSID, password, and security information on the next couple lines.
Code: [Select]
// These are the interrupt and control pins
#define ADAFRUIT_CC3000_IRQ 2 // MUST be an interrupt pin!
// These can be any two pins
#define ADAFRUIT_CC3000_VBAT A3
#define ADAFRUIT_CC3000_CS 8
// Use hardware SPI for the remaining pins
// On an UNO, SCK = 13, MISO = 12, and MOSI = 11
Adafruit_CC3000 cc3000 = Adafruit_CC3000(ADAFRUIT_CC3000_CS, ADAFRUIT_CC3000_IRQ, ADAFRUIT_CC3000_VBAT,
SPI_CLOCK_DIV2); // you can change this clock speed but DI
#define WLAN_SSID "mySSID" // cannot be longer than 32 characters!
#define WLAN_PASS "myPassword"
// Security can be WLAN_SEC_UNSEC, WLAN_SEC_WEP, WLAN_SEC_WPA or WLAN_SEC_WPA2
#define WLAN_SECURITY WLAN_SEC_WPA2