1
TinyDuino Processors & TinyShields / stk500_recv(): programmer is not responding
« on: March 11, 2014, 08:30:22 PM »
Hello,
I am trying to upload a sketch on my TinyDuino but I keep getting the following error: stk500_recv(): programmer is not responding. I have found other posts about this error but no solution.
I think I properly followed all the instructions here: https://tiny-circuits.com/learn/learn2/.
I am using the Arduino IDE 1.0.5 on a Mac and I selected the board "Arduino Pro or Pro Mini (3.3V, 8MHz) w/ ATmega328".
Any help would be greatly appreciated. Below are the verbose logs of the Arduino IDE during the failed upload.
Cheers,
Thomas
I am trying to upload a sketch on my TinyDuino but I keep getting the following error: stk500_recv(): programmer is not responding. I have found other posts about this error but no solution.
I think I properly followed all the instructions here: https://tiny-circuits.com/learn/learn2/.
I am using the Arduino IDE 1.0.5 on a Mac and I selected the board "Arduino Pro or Pro Mini (3.3V, 8MHz) w/ ATmega328".
Any help would be greatly appreciated. Below are the verbose logs of the Arduino IDE during the failed upload.
Cheers,
Thomas
Code: [Select]
Binary sketch size: 15,864 bytes (of a 30,720 byte maximum)
/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude -C/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega328p -carduino -P/dev/tty.usbserial-A102JHQY -b57600 -D -Uflash:w:/var/folders/8x/g34nnw695b11sb50k4hll_980000gn/T/build5844442381152241011.tmp/GPS_datalogger.cpp.hex:i
avrdude: Version 5.11, compiled on Sep 2 2011 at 18:52:52
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/thomas/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/tty.usbserial-A102JHQY
Using Programmer : arduino
Overriding Baud Rate : 57600
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude done. Thank you.