[inprogress] Tiny arm assembly instructions errors and corrections.

AlanKilian

  • Full Member
  • ***
    • Posts: 16
    • View Profile
  • All four servos do not calibrate on Step 6 using the preprogrammed RobotZero processor.
    • One servo does not calibrate, so I moved it to another socket and it calibrated.
    • I tried two different RobotZero processor boards with the same result of one connector not calibrating the servo.

  • All four servos do not calibrate TO THE SAME ANGLE on Step 6 using the preprogrammed RobotZero processor.
    • If I move servos from one socket to another socket, they move to different angles.

  • Parts AB6, AB7 and AB8 are not shaped like the images on Steps 9 and 10
  • Step 17 should say acrylic ROUND part E instead of acrylic HEX part E
« Last Edit: March 12, 2020, 03:25:48 PM by AlanKilian »


lennevia

  • Administrator
  • Sr. Member
  • *****
    • Posts: 72
    • View Profile
Hello Alan,

We made the edits to the pictures and the wording that you suggested. You can review the changes here:

Tiny Arm Assembly


AlanKilian

  • Full Member
  • ***
    • Posts: 16
    • View Profile
The new assembly instructions are WONDERFUL with the green color coding to show important locations in the assembly step.


lennevia

  • Administrator
  • Sr. Member
  • *****
    • Posts: 72
    • View Profile
Happy to hear you like them! We are looking to include animations in the future in a web page to show how pieces fit together.