TinyCircuits

Stackable Modular case

Stackable Modular case
« on: February 04, 2017, 12:13:48 PM »
make rectangular case that fits between or individual tinydurino shields for a more finished look and keep dirt out.  Could be designed to replace screws by snapping together.  Might consider a bottom and top caps.  caps could be the mechanical interface for other devices like camera hotshoe or GPS antenna domes

Re: Stackable Modular case
« Reply #1 on: July 13, 2017, 01:22:47 PM »
make rectangular case that fits between or individual tinydurino shields for a more finished look and keep dirt out.  Could be designed to replace screws by snapping together.  Might consider a bottom and top caps.  caps could be the mechanical interface for other devices like camera hotshoe or GPS antenna domes

A little late, but this sounds like an interesting project. I have access to laser-cutters, and I don't see any modular cases for tinyduino. The easiest would be to cut U-shape stackable sheets, so that one side is open for USB, switches, etc. Only problem is the exact height of each module. I'm not sure I can find acrylic to match exactly so they stack perfectly.