TinyCircuits

Cabinet Switch

Cabinet Switch
« on: May 30, 2016, 09:57:21 PM »
On the assembly video, it appears that the white on/off switch actuator is captive to the side panel. In my package, the white switch was just loose in the parts bag. And I see no way to secure it to the cabinet. Am I missing something obvious?

Re: Cabinet Switch
« Reply #1 on: May 31, 2016, 01:18:07 PM »
Hi Dwaine,

If it's an acrylic cabinet, the switch should be pre-installed. It may have been damaged in shipping or incorrectly made. If that's the case, send an email to info@tinycircuits.com with your info/address. If it's a wood cabinet, the switch would not be installed, but should be a good press fit with a clip that holds it in place.

Thanks,
Ben

Re: Cabinet Switch
« Reply #2 on: June 04, 2016, 07:27:05 AM »
Thanks Ben! Email sent.

Re: Cabinet Switch
« Reply #3 on: June 10, 2016, 08:47:00 PM »
Got the new switch. It works great. Thanks!

Re: Cabinet Switch
« Reply #4 on: July 05, 2016, 01:36:31 PM »
I got the wood enclosure. 
After reading this post I'm confused.
There was nothing in the package for the power switch.
Just use a paperclip?