Messages

1

TinyDuino Processors & TinyShields / Re: Unable to upload sketch - Tiny Screen+

« on: March 08, 2017, 10:35:07 AM »

I got it working after physically unplugging the USB cable from the computer.  It takes a couple of tries but it works now.

Thanks!

2

TinyDuino Processors & TinyShields / Unable to upload sketch - Tiny Screen+

« on: March 05, 2017, 11:35:16 AM »

I have two tinyscreen+ and for one of my devices, I keep getting the following error message when trying to upload a sketch.  I'm running Windows 7 and Arduino 1.8.1.  Has anyone else seen this error?

Code: [Select]

Set binary mode
SAM-BA operation failed
readWord(addr=0)=0x200023a0
readWord(addr=0xe000ed00)=0x410cc601
readWord(addr=0x41002018)=0x10010305
version()=v1.1 [Arduino:XYZ] Dec  2 2015 17:44:20
chipId=0x10010005
Connected at 921600 baud
readWord(addr=0)=0x200023a0
readWord(addr=0xe000ed00)=0x410cc601
readWord(addr=0x41002018)=0x10010305
Atmel SMART device 0x10010005 found
write(addr=0x20004000,size=0x34)
writeWord(addr=0x20004030,value=0x10)
writeWord(addr=0x20004020,value=0x20008000)
Device       : ATSAMD21G18A
readWord(addr=0)=0x200023a0
readWord(addr=0xe000ed00)=0x410cc601
readWord(addr=0x41002018)=0x10010305
Chip ID      : 10010005
version()=v1.1 [Arduino:XYZ] Dec  2 2015 17:44:20
Version      : v1.1 [Arduino:XYZ] Dec  2 2015 17:44:20
Address      : 8192
Pages        : 3968
Page Size    : 64 bytes
Total Size   : 248KB
Planes       : 1
Lock Regions : 16
Locked       : readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
readWord(addr=0x41004020)=0xffff
An error occurred while uploading the sketch