TinyCircuits

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - cp

Pages: [1]
1
TinyLily / Re: Trouble powering Tiny Lily
« on: November 07, 2013, 12:24:03 AM »
Good pull alecf.  I flipped the connector wrong side over and slid it over until just the two power pins were used.  That got it working.

2
TinyLily / Re: Trouble powering Tiny Lily
« on: September 03, 2013, 07:53:38 PM »
Wel, it works from usmb connected to a computer, so I don't thing that the board is shorted.  The battery is fine.

3
TinyLily / Trouble powering Tiny Lily
« on: July 11, 2013, 01:19:22 PM »
I have a TinyLily with a TinyLily battery adapter.  I have a 3.7v lipo battery from Adafruit.  When the battery adapter is disconnected from the tiny lily the voltage is 4.1 on the terminals of the battery adapter.  When the battery adapter is connected to the TinyLily the voltage drops to about .4 volts but the TinyLily does not start.

When powered from the USB connector the TinyLily works.  Do I need a higher voltage battery?

Pages: [1]