TinyCircuits

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - TinyCircuits

Pages: [1] 2 3 ... 7
1
Tiny Arcade / Re: Kooky Kookies - a Neo Retro Game
« on: March 13, 2018, 08:02:49 PM »
Cool! Another fun game from Neo Retro!

2
New Product Ideas / Re: Whatever happened to those new products?
« on: March 13, 2018, 07:55:17 PM »
Sorry about that!  These are definitely not cancelled, just delayed a short bit.  We got swamped around Nov - Dec so we decided to push this off a little bit.  But we are very close to releasing these very soon, likely via a Kickstarter early next month. 

There will be a new processor board released (basically the TinyScreen+ without the screen), which will have a 32-bit SAMD ARM processor (essentially the Arduino Zero, but smaller), along with a whole new line of tiny boards (30+), which connect to the system via small 5-pin cables, allowing for a lot more flexibility with making miniature projects.  These will be lower cost, and also work with other boards, like a standard Arduino, Raspberry Pi, and most other standard microcontroller systems. 

Looking forward to getting these out soon, so keep watching.  We should be promoting this more over the next month as we lead up to the release.

Thanks,

Ken
TinyCircuits

3
User Projects / Code Examples / Re: Viobyte (Pac-Man Clone)
« on: March 13, 2018, 07:47:46 PM »
Very cool to see on the Tiny Arcade!  Nice job with the port! 

Ken

4
User Projects / Code Examples / Re: Viobyte (Pac-Man Clone)
« on: November 26, 2017, 05:35:18 PM »
Awesome game!  Thanks for making this, look forward to the final version!

5
Tiny Arcade / Re: Leanna the Lion - a Neo Retro Game
« on: July 14, 2017, 05:03:03 PM »
Awesome new game!  Thanks for posting this, had a lot of fun playing it!

Ken

6
Tiny Arcade / Re: Displaying the weather in the TinyArcade
« on: February 05, 2017, 12:10:47 PM »
Awesome!  Going to share this on our Facebook page!

Thanks!

Ken
TinyCircuits

7
Tiny Arcade / Re: Two screens, no battery?
« on: July 01, 2016, 06:44:49 PM »
Oops - sorry about that!  We'll definitely swap it out for you - can you send an email to info@tinycircuits.com with your address so we can arrange this?

Thanks,

Ken
TinyCircuits

8
TinyDuino / Re: ProtoShield 3 and TinyScreen
« on: September 25, 2015, 08:26:04 AM »
Actually there is a solution for this now, we have a new protoboard that has an optional top connector.  You can find it here:  https://www.tiny-circuits.com/tiny-shield-proto-board-all-163.html

Thanks,

TinyCircuits

9
TinyDuino / Re: Is the TinyShield BLE Nordic FCC certified?
« on: August 30, 2015, 11:41:30 AM »
The WiFi is certified, as is the Bluegiga BLE Shield.  The Nordic shield is not yet certified.

Thanks,

TinyCircuits

10
General Discussion / Re: Streaming Live Video to Tiny Screen
« on: August 13, 2015, 05:27:13 PM »
It may be possible, alot depends on the interface to the camera.  We have an example on the Hackster page showing how to display video from a microSD card to the TinyScreen:

https://tinycircuits.hackster.io/tbatey_tiny-circuits/tinyscreen-animated-and-static-images

The problem will be that you'll likely have to manipulate the data from the video camera before sending it to the screen, which will slow things down. 

Thanks,

Ken
TinyCircuits

11
Yes!  This is definitely possible.  There are several different proto board options that expose the IO pins and let you either use screw terminals (The Terminal Block TinyShield), or solder points.  You can use this to hook up external sensors, buzzers, buttons, LEDs, etc.

Thanks,

Ken
TinyCircuits

12
Sorry that you're having problems, one difference between newer versions of the Arduino IDE and older ones is the way the board is selected.  Under Tools... Board, make sure "Arduino Pro or Pro Mini" is selected.  Then under Tools... Processor, make sure the Processor is set to "Atmega328 (3.3V, 8MHz). 

Try that and see if it helps.

Thanks,

Ken
TinyCircuits

13
TinyDuino / Re: Other Alternative Battery solutions
« on: August 09, 2015, 06:40:35 PM »
Sounds like a very cool project!

The TinyDuino can use and charge standard 3.7V Lithium-ion / Lithium-polymer batteries.  We'll eventually have more options, but you can definitely use a larger battery (Sparkfun and Adafruit both have many options).  You will either need to solder the battery into the board, or cut the connector off of one of our batteries and solder it onto the new battery.

Thanks,

Ken
TinyCircuits

14
TinyDuino / Re: Problem uploading to TinyDuino
« on: August 09, 2015, 06:38:17 PM »
Sorry that you're having problems, one difference between newer versions of the Arduino IDE and older ones is the way the board is selected.  Under Tools... Board, make sure "Arduino Pro or Pro Mini" is selected.  Then under Tools... Processor, make sure the Processor is set to "Atmega328 (3.3V, 8MHz). 

Try that and see if it helps.

Thanks,

Ken
TinyCircuits

15
Hi,

Can you post the actual code for sending this, its difficult to see in just a screenshot.  A few questions - what is BPM and what values can it have?  You are also hardcoding to send just a single byte at time, this should be the size of all the data that being sent in any given transaction.

Thanks,

Ken
TinyCircuits

Pages: [1] 2 3 ... 7