Show Posts
1
General Discussion / Hi and I have questions.
« on: March 06, 2014, 12:55:18 AM »
First Hello members of the forum.
Second I have questions already
1. When I put the 1632 battery into the processor board, are there LEDs that are supposed to blink? I've seen LEDs turn on some times, but after that they are no longer on no matter what I do. Voltage on battery is still 2.7V.
2. Error when trying to upload blink code. I've followed the instructions correctly on the tinycircuit website and made sure that the ports are correct. Also, I've pressed the reset button on the board. I'm using processor, USB, and tinyshield rev4. My error reads:
"avrdude: verification error, first mismatch at byte 0x0000 0x0c != 0x00"
my friend says there is already data on the board that must be cleared before I upload. I notice that the TD is not from Arduino so maybe using the Arduino 1.0.5 is different when uploading to the TD.
Thank you for your help in advance
Second I have questions already
1. When I put the 1632 battery into the processor board, are there LEDs that are supposed to blink? I've seen LEDs turn on some times, but after that they are no longer on no matter what I do. Voltage on battery is still 2.7V.
2. Error when trying to upload blink code. I've followed the instructions correctly on the tinycircuit website and made sure that the ports are correct. Also, I've pressed the reset button on the board. I'm using processor, USB, and tinyshield rev4. My error reads:
"avrdude: verification error, first mismatch at byte 0x0000 0x0c != 0x00"
my friend says there is already data on the board that must be cleared before I upload. I notice that the TD is not from Arduino so maybe using the Arduino 1.0.5 is different when uploading to the TD.
Thank you for your help in advance