Messages

1

TinyDuino Processors & TinyShields / Re: Bluetooth Module -- receiving garbage on serial port

« on: June 20, 2014, 03:45:20 AM »

Hello,
I solved the problem, the GPIO pin 7 was pulled high by a 1K resistor(R4), which defaults the baud rate to 9600 regardless of the baud you provide.
If you want to use the software selected baud rate, disolder the Resistance R4, and it will work with whatever baud you give.

Regards,
Pratip Ghosh.

2

TinyDuino Processors & TinyShields / Re: Bluetooth Module -- receiving garbage on serial port

« on: June 19, 2014, 06:00:09 AM »

Hi,
I am trying to use tinyduino bluetooth module for sending EEG data, but if I use any baud rate other than 9600 for sending data (as baud rate 9600 is too low), it receives garbage values in the PC. Any idea how to use baud rate higher than 9600?

Regards,
Pratip.