TinyCircuits

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - calvinthedestroyer

Pages: [1] 2 3 ... 7
1
Tiny Arcade / Re: TinyArcade OLED Screen for Arduino Uno?
« on: October 18, 2016, 10:48:41 AM »
It would take some soldering but could he just add our protosheild to the tinyscreen and solder wires from the protoshield to another arduino?

2
New Product Ideas / Re: gap connector (without shield)
« on: October 18, 2016, 10:46:33 AM »
Just trim a protoboard down.

You would need a microscope to solder those headers together. :)

3
New Product Ideas / Re: protoboard microconnector plugs/wires
« on: October 18, 2016, 10:43:53 AM »
Those would be nice, but expensive. 

4
TinyDuino / Re: A question on a LED used in TinyCircuits
« on: October 18, 2016, 10:38:57 AM »
I believe the leds on the USB shield are using 5v (from the USB cable) not 3.3v

The TinyDuino has a 3.3v regulator on it that steps the 5v down to 3.3v.
 

5
General Discussion / Re: Tinyduino aircraft gauges?
« on: June 10, 2016, 01:17:15 PM »
We did buy some weird circular LED screens for making a programmable automotive gauge, but never had time to move forward with it.  Now that we have more sensor boards I think we need to revisit it.

do they make a Tiny air speed sensor? Last time I saw one, it was pretty big.

6
General Discussion / Re: Problem with the TinyScreen
« on: June 10, 2016, 11:32:51 AM »
Double check to make sure the screen is connected to the Tinyduino all the way.
Make sure there is no dirt or hair inside that tiny connector too.

7
TinyDuino / Re: Cannot reprogram my Tinyduino
« on: June 08, 2016, 06:35:29 AM »
If this continues to be a problem then, contact Tinycircuits and see about replacing the USB shield. It could be that you have a bad one. (although, usually when I test a bad one it locks up the USB interface (open pin) or does nothing and get hot (shorted pin).

other than that, make sure everything is set to talk st the same speed?

8
Tiny Arcade / Re: Won't recognize microsd card
« on: June 03, 2016, 10:28:30 AM »
LOL, Glad to see some good humor in the forum.
Also glad to see the problem resolved without having to change customer's names. :)

9
User Projects / Code Examples / Re: TinyDuino Game Kit Case
« on: June 03, 2016, 10:15:00 AM »
Can you send me a copy of the files and I'll try printing them?

A4S8B7@DSPrototyping.com

10
Will need to put this in the Rockets for the next Rocket Launch.
Very nice project!

11
Not sure if I can help you, In one of my sketches I replaced my non-working case statement with IF statements:

https://codebender.cc/sketch:60785


12
User Projects / Code Examples / Re: TinyOutrun
« on: June 03, 2016, 09:59:04 AM »
This is one of my favorite games for the Tiny Screen.

13
Tiny Arcade / Re: Onboard games gone.
« on: June 03, 2016, 09:41:02 AM »
Twice now I've seen the title of this thread and first thought it said ONBOARD GAMES GALORE. I get veeery excited and then veeery sad.

We will just have to write more games then :)

14
General Discussion / Re: Will this work: TinyScreen+ Basic Datalogger
« on: June 03, 2016, 09:26:23 AM »
You can use the dual motor controller shield for controlling the pager motor.

15
Here are the sprites I have so far. So tiny!

Pages: [1] 2 3 ... 7