TinyCircuits Forum

TinyCircuits Products => Wirelings => Topic started by: Cyborg84 on April 30, 2020, 05:02:55 PM

Title: Wireling Interrupt specifics
Post by: Cyborg84 on April 30, 2020, 05:02:55 PM
I noticed on the schematic that there are two options for an I2C interrupt from the wireling board to either IO2 or IO3, but I cant tell which resistor is which (R17 and R18) on the board.

Please clarify which one is present by default - (maybe provide an annotated picture of the board).

Also, it looks like all 4 of the interrupt signals from the connectors are connected to AD0 - AD3 by default, is that correct?
- Mike
Title: Re: Wireling Interrupt specifics
Post by: lennevia on May 01, 2020, 11:47:32 AM
Hello Mike,

What board are you looking at?

Is there something specific you are aiming to accomplish with interrupts?

-Réna