TinyCircuits Forum

General Category => General Discussion => Topic started by: AlanKilian on March 12, 2020, 02:19:37 PM

Title: [inprogress] Tiny arm assembly instructions errors and corrections.
Post by: AlanKilian on March 12, 2020, 02:19:37 PM

• All four servos do not calibrate on Step 6 using the preprogrammed RobotZero processor.
• One servo does not calibrate, so I moved it to another socket and it calibrated.
• I tried two different RobotZero processor boards with the same result of one connector not calibrating the servo.


• All four servos do not calibrate TO THE SAME ANGLE on Step 6 using the preprogrammed RobotZero processor.
• If I move servos from one socket to another socket, they move to different angles.


• Parts AB6, AB7 and AB8 are not shaped like the images on Steps 9 and 10
• Step 17 should say acrylic ROUND part E instead of acrylic HEX part E

Title: Re: [inprogress] Tiny arm assembly instructions errors and corrections.
Post by: lennevia on March 16, 2020, 01:08:06 PM

Hello Alan,

We made the edits to the pictures and the wording that you suggested. You can review the changes here:

Tiny Arm Assembly (https://github.com/TinyCircuits/TinyCircuits-Wireling-Kickstarter-Kits/raw/master/Premium-Robot-Kit/res/TinyArmAssembly.pdf)

Title: Re: [inprogress] Tiny arm assembly instructions errors and corrections.
Post by: AlanKilian on March 26, 2020, 11:15:12 AM

The new assembly instructions are WONDERFUL with the green color coding to show important locations in the assembly step.

Title: Re: [inprogress] Tiny arm assembly instructions errors and corrections.
Post by: lennevia on March 27, 2020, 12:47:25 PM

Happy to hear you like them! We are looking to include animations in the future in a web page to show how pieces fit together.