TinyCircuits Forum

TinyCircuits Products => TinyDuino Processors & TinyShields => Topic started by: jpcookie on March 29, 2018, 06:23:41 PM

Title: BLE tinyshield not broadcasting bluetooth signal
Post by: jpcookie on March 29, 2018, 06:23:41 PM

I followed the steps contained in: https://tinycircuits.com/blogs/learn/bluetooth-low-energy-tinyshield-st-tutorial

Sadly there is no signal being transmitted. I was able to get the signal test to work however.

Title: Re: BLE tinyshield not broadcasting bluetooth signal
Post by: jpcookie on March 30, 2018, 02:33:06 PM

Sorry make that blink test. It's like the module is able to take the code but it's not showing up on the serial console in the IDE.

https://tinycircuits.com/blogs/learn/bluetooth-low-energy-tinyshield-st-tutorial

It gets to the upload portion so I'm really not getting it. This is my first arduino device.

Title: Re: BLE tinyshield not broadcasting bluetooth signal
Post by: Brent on April 23, 2018, 11:09:50 AM

So, what are you doing to verify that no signal is being transmitted? And, could you clarify what you mean by getting the signal test to work? Bluetooth can be a little tricky, and it has as much to do with what you are doing with the other device you are using to connect to your TinyDuino.