TinyCircuits Forum

General Category => General Discussion => Topic started by: tarun71 on February 12, 2018, 02:15:32 AM

Title: Please suggest a board for this project
Post by: tarun71 on February 12, 2018, 02:15:32 AM

Hi everyone
I am a newbie . I have done a few basic Arduino projects. I want to make a clip on type IMU sensor with a digital display of X,Y and Z angles, want it to be a compact independent unit. My requirements are:
1. A small arduino board powered by button cells or small lithium battery
2. A small OLED screen which can display 3 lines.
3. A small accurate IMU shield.

I want the unit to be light weight and not larger than 2inches.

PS: please also suggest if it is possible to pause the readings on the OLED display at a particular position of the IMU sensor by using a remote switch.
Title: Re: Please suggest a board for this project
Post by: Ben R on February 20, 2018, 10:51:37 PM
The easiest option is to get a tinyscreen+ with a screen + buttons + battery support and a Sensor