TinyCircuits Forum
General Category => General Discussion => Topic started by: andrew36b on August 20, 2016, 06:26:16 PM
-
Hello,
I was able to connect once and download the example tinyscreen+ from the Arduino IDE. However I tried loading my own script (and there might have been something wrong with it), and now I can't communicate at all with my TinyScreen+. I'm on a Mac running El Capitan, and I'm wondering if there is something that people recommend trying to reestablish communications.
thanks,
-andrew
-
Hi Andrew,
Sounds like it's just an issue with your script- try holding the button closest to the USB connector and turning TinyScreen+ off and then on again- it should stay in the bootloader and have a functioning USB connection, allowing you to upload new code.
-
Hi Ben,
Thanks! This solved my issue.
-andrew
Hi Andrew,
Sounds like it's just an issue with your script- try holding the button closest to the USB connector and turning TinyScreen+ off and then on again- it should stay in the bootloader and have a functioning USB connection, allowing you to upload new code.