TinyCircuits Forum

TinyCircuits Products => TinyDuino Processors & TinyShields => Topic started by: CloudCityEvan on December 29, 2015, 12:40:04 PM

Title: Update and Thanks!
Post by: CloudCityEvan on December 29, 2015, 12:40:04 PM

Hi All!

I just wanted to give a little update that I have successfully built out the prototype that I've been working on for the last few weeks (the first version was with a standard Arduino Uno, RedBearLab BLE Shield and a Hall Effect Sensor, and now I'm using TinyDuino (with LiPoly battery)/TinyShield nRF8001/Protoboard/Reed Switch).

There's still more to do, but the basic functionality is there and I'm able to get data back and forth from the TinyDuino/TinyShield BLE device to my iOS app that I'm using to test and it's working GREAT!

Thanks to Ben and all others who have been answering my newbie questions. The answers have all been very helpful and each one has helped move me a little bit forward each time. :)

Like I said, I still have some more to do (possibly real-time clock and datalogging stuff), but this is the first step!

Thanks Again!

Title: Re: Update and Thanks!
Post by: Ben Rose on December 30, 2015, 09:23:08 PM

Great, glad you're up and running. Our question when we hear about an iOS BLE app working is whether or not the source will be available at some point ;)