TinyCircuits Forum

TinyCircuits Products => TinyDuino Processors & TinyShields => Topic started by: wobbly15 on August 03, 2015, 11:35:22 AM

Title: Problem uploading to TinyDuino
Post by: wobbly15 on August 03, 2015, 11:35:22 AM

Hi all,

I recently received my TinyDuino, and have been trying to upload Blink to the board (using Arduino IDE 1.6.5). I keep getting errors while uploading, and have noticed that other people have faced similar issues. I tried different USB cables and power cycling, does anyone have any other suggestions? Thanks!

Title: Re: Problem uploading to TinyDuino
Post by: Grimstone on August 04, 2015, 08:48:38 AM

You can run IDE 1.0.6. I normally use it for TinyDuino.

https://www.arduino.cc/en/Main/OldSoftwareReleases

Title: Re: Problem uploading to TinyDuino
Post by: TinyCircuits on August 09, 2015, 06:38:17 PM

Sorry that you're having problems, one difference between newer versions of the Arduino IDE and older ones is the way the board is selected.  Under Tools... Board, make sure "Arduino Pro or Pro Mini" is selected.  Then under Tools... Processor, make sure the Processor is set to "Atmega328 (3.3V, 8MHz). 

Try that and see if it helps.

Thanks,

Ken
TinyCircuits